• Propiedades

    Property
    Max. flow 400 m3/h
    Differential head 30 m wc
    Max. Inlet pressure 10 bar
    Viscosity 1000 cP
    Max. temperature 140 °C
    Impeller type Open or closed 
    Max. gas content 30%
    Max. drive power 45 kW
    Speed 1800 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single bellow, sterile
    Available material O-ring EPDM, FKM, FFKM
    Connections EN1092-1 & ANSI flanges. DIN11851. SMS. RJT. Tri-Clamp 
    Surface finish Electropolished
    Certificates FDA. EAC 
  • Descripción

    The multi-phase pump is a combination of a standard centrifugal pump and a liquid ring pump both mounted together on 1 motor and 1 shaft. The centrifugal pump is used for pumping the liquid and brings the main performance of the pump. When a gas-bubble starts to build up in the eye of the centrifugal impeller, it is evacuated by the liquid ring impeller. The pump has 1 suction and 2 discharges: a main discharge of the centrifugal pump and a smaller discharge of the liquid ring pump that functions as an air and foam vent. The air/foam vent is typically connected back to the suction vessel. The GFP multi-phase pump is typically used for foaming liquids and (viscous) liquids containing gas in the food-industry. Offering a solution to liquids that are difficult to pump with standard centrifugal pumps. E.g. starch slurries & proteins

Bomba serie GFP

La bomba multifásica es una combinación de una bomba centrífuga estándar y una bomba de anillo líquido, ambas montadas juntas en 1 motor y 1 eje. La bomba centrífuga se utiliza para bombear el líquido y aporta el rendimiento principal de la bomba.

Cuando una burbuja de gas empieza a acumularse en el ojo del impulsor centrífugo, es evacuada por el impulsor de anillo líquido.

La bomba tiene 1 aspiración y 2 descargas: una descarga principal de la bomba centrífuga y una descarga más pequeña de la bomba de anillo líquido que funciona como purgador de aire y espuma. El venteo de aire/espuma suele conectarse de nuevo al recipiente de aspiración.

  1. Ejecución monobloque con motores estándar IEC
  2. Purgador de aire
  3. Rodete de anillo líquido
  4. Rodete centrífugo
  5. Entrada de agua limpia

 

Curvas de rendimiento